Nice Gate Opener Repair

Robus sliding operator not moving, or a Titan swing gate acting up. Diagnosed before anything gets replaced.

Technician seen from behind at dusk resting a gloved hand on the open control box of a gate operator beside a brick pillar with the circuit board visible inside

Nice is an established gate operator brand found on Metro Detroit residential and estate properties, spanning the Robus sliding operator line and the Titan swing gate line. 313 Gates diagnoses and repairs Nice operators across both lines, including a Robus motor that has stopped responding entirely.

Common issues we fix.

NC-01 Robus motor not responding The sliding operator gets power but does nothing when triggered by remote, keypad, or wall switch. Common fix Board and motor check
NC-02 Remote programming lost Remotes that worked fine suddenly stop responding, often after a board reset or a power interruption. Common fix Receiver reprogramming
NC-03 Slow or grinding operation The gate still moves but noticeably slower than before, or makes a new noise under load. Common fix Encoder and gear inspection
Nice gate opener not cooperating? Robus, Titan, or another Nice model, diagnosed on-site.

Robus and Titan fail differently

Nice’s Robus sliding operator and Titan swing operator share a brand but not a failure profile: Robus issues tend to show up as the motor going completely silent, while Titan issues more often show up as a slow or grinding swing rather than total silence. Knowing which line is actually installed changes what a technician checks first, which is why identifying the exact Nice model matters before diagnosis even starts.

When a Nice operator is worth repairing

Board and remote issues on a Nice operator are almost always a straightforward repair, since the mechanical drive components tend to outlast the electronics. Full replacement becomes the more sensible call once the motor or gearbox itself has worn down, which shows up as a grinding noise that worsens over weeks rather than appearing suddenly. If the actual problem turns out to be the gate hardware rather than the operator, that gets handled under gate repair instead.

Questions, answered.

Do you service both Nice Robus and Nice Titan operators?

Yes. 313 Gates works on Nice's Robus sliding gate line and Titan swing gate line, along with other Nice operator models found on Metro Detroit properties.

My Nice Robus motor isn't working at all. What's usually wrong?

A completely unresponsive Robus operator is most often a control board or power issue rather than the motor itself. A technician checks power delivery and the board before assuming the motor needs replacing.

Is Nice Apollo the same as a regular Nice gate opener?

No, they're different product lines. Nice Apollo covers a separate swing gate operator family under the Nice name; see the Nice Apollo gate opener repair page if that's the specific unit installed on your gate.

Ready to get started?